To open any link in a new tab, preserving your position in the current article, just hold down the <CTRL> key on your keyboard before clicking the link or click using your mouse wheel.

PlanSwift Out of Memory Error

If you encounter a pop-up that states 'Error Out of Memory/Storage', or when you import drawings and they appear as blank white sheets or a gray background, that is almost always caused by loading in images at too high of DPI.


The problem with that is there can several things causing the error.

The three ways to cover most of the issues will be:


1. Reducing Memory Requirements


Re-import the images in PlanSwift. When you get to the Tiff Conversion tool, make sure the DPI is set at "200". Most images come in clear and error-free when set to this standard. However, you can be flexible with that number depending on the image within the PDF before it's converted.




You can choose to decrease or increase that number depending on what you want. Decreasing it will decrease the memory used by PlanSwift but will decrease the quality. Increasing the number will increase the memory used making it more likely for the error message to appear, but will increase the quality. We have found that if you change the DPI up to 100 in either direction will resolve most issues.


Also, choosing to import the image as black and white rather than the grayscale option will use less memory.


2. Reducing the DPI for PDF Conversions



PDF's can have upwards of 7000 DPI, and PlanSwift's standard is 200 DPI for conversion, so even though an image is converted at 200, the original image could still be too large.


The fix for this is to reprint the PDF with a PDF printer like Adobe or CutePDF Writer. (CutePDF Writer can be found here.) 


In the printer settings, go to Properties then Advanced and choose to reprint at a lower DPI; a lot of times the lowest DPI (72) will provide a perfectly clear image and will then import with no problems. 


3. Verifying the Integrity of the PDF


If the first two solutions don't resolve the issue, then it might be a problem with the PDF, so asking the sender to resend could be the fastest way to fix it.


If none of these three solutions resolve the issue, call PlanSwift Technical Support at 888-752-6794 Ext. 2.


Cute PDF Writer Installer:

CuteWriter.exe

Copyright 2023 ConstructConnect